Product ID:DS302, HOT DIP STRIPPABLE COATING - TYPE 1
MSDS Date:02/19/1991
FSC:8030
NIIN:00N031548
MSDS Number: BNSGZ

DIP SEAL PLASTICS INC

2311 23RD AVE
ROCKFORD, IL 61108-7392
US

Emergency Phone: 815-398-3533

Info Phone: 815-398-3533

Cage: 29437

DIP SEAL PLASTICS, INC.

ROCKFORD, IL 61108

Telephone: (815) 398-3533

Cage: 29437

MINERAL OIL, PETROLEUM DISTILLATES, SOLVENT-DEWAXED HEAVY

CAS: 64742-65-0

RTECS: PY8038500

Fraction By Weight: 65%

ACGIH TLV: 5 MG/M3;10 STEL

PHTHALIC ACID, BENZYL BUTYL ESTER; (BUTYL BENZYL PHTHALATE)

CAS: 85-68-7

RTECS: TH9990000

Fraction By Weight: <5%

EPA Report Quantity: 100 LBS

DOT Report Quantity: 100 LBS

FATTY ACID, SOYBEAN OIL, EPOXIDIZED; (EPOXIDIZED SOY BEAN

CAS: 8013-07-8

RTECS: LH8010000

Fraction By Weight: <5%

PARAFFIN WAX (MIXTURE INCLUDES ING 5) (LIMITS GIVEN AS

CAS: 64742-43-4

Fraction By Weight: <5%

OSHA PEL 2 MG/M3

ACGIH TLV: 2 MG/M3

PARAFFIN WAXES AND HYDROCARBON WAXES, MICROCRYST

CAS: 63231-60-7

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:NO Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:ACUTE: EYE/SKIN CONTACT: MELTED
COMPOUND CAN CAUSE SEVERE BURNS. INHAL: DUE TO THE LOW PRESSURE AT
AMBIENT TEMPERATURES NO SIGNIFICANT NASAL OR RESPIRATORY IRRITATION
IS EXPECTED. INGEST: COMPARATIVEL Y NON-HAZARDOUS AT ROOM
TEMPERATURES. CHRONIC OVEREXPOSURE: NONE ESTABLISHED.
Explanation of Carcinogenicity:CAS #64742-65-0 IS LISTED BY THE RTECS
AS AN IARC GROUP 1 CARCINOGEN.
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:EYES: FLUSH W/LARGE VOLUMES OF WATER FOR A MINIMUM OF 15
MINUTES. GET MEDICAL ATTENTION. SKIN: COOL AT ONCE! IF 2ND OR 3RD
DEGREE BURNS ARE SUSPECTED, GET MEDICAL AID. INHAL: REMOVE TO FRESH
AIR. INGE ST: SMALL AMOUNTS ARE ESSENTIALLY HARMLESS.

Flash Point Method:COC
Flash Point:395F,202C
Extinguishing Media:WATER FOG, DRY CHEMICAL, FOAM & CO2.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA & FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:WHEN HEATED ABOVE FLASH POINT, THIS
MATERIAL WILL RELEASE FLAMMABLE VAPORS WHICH CAN BURN OR BE
EXPLOSIVE IN CONFINED SPACES & EXPOSED TO A SOURCE OF IGNITION.

Spill Release Procedures:REMOVE ALL SOURCES OF IGNITION AROUND SPILL
AREA.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE IN A COOL, DRY AREA.
Other Precautions:MELTED DIP SEAL WILL PRODUCE SEVERE BURNS IF GOTTEN
ON BODY.

Respiratory Protection:NONE NEEDED. IF NECESSARY, USE NIOSH/MSHA
APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN .
Ventilation:LOCAL EXHAUST PREFERED.
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:CHEM WORK GOGG/FULL LENGTH FSHLD .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
BP: >400F,>204C FOR VOLATILE PORTION. VP: <0.1 @ 70F FOR VOLATILE
PORTION. VAP DENS: >10 FOR VOLATILE PORTION.

HCC:N1
Boiling Pt:B.P. Text:SUPP DATA
Vapor Pres:SUPP DATA
Vapor Density:SUPP DATA
Spec Gravity:0.96
Evaporation Rate & Reference:<1 (BUAC=1)
Solubility in Water:NEGLIGIBLE (BY WT)
Appearance and Odor:CLEAR AND COLORED, TRANSPARENT, HOT MELT PLASTIC
COATINGS AND TANKS.
Percent Volatiles by Volume:0.1

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZERS, STRONG ACIDS AND ALKALIS.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:INCOMPLETE COMBUSTION MAY PRODUCE CO.
Conditions to Avoid Polymerization:DIPPING TEMPERATURES IN EXCESS OF
350F.

Waste Disposal Methods:DISPOSE OF CONTAMINATED MATERIAL IN AN APPROVED
DISPOSAL SITE, COMPLY WITH FEDERAL, STATE & LOCAL REGULATIONS
CONCERNING WASTE DISPOSAL INTO LANDFILLS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.